Reno Dry 2R
RENO-DRY 2R provides excellent long lasting weather protection to stone, masonry, brick, mortar, concrete and cement-based paints.
RENO-DRY 2R has all the advantages of Reno-Dry, plus some more important features.
RENO-DRY 2R will reduce spalling or flaking masonry.
RENO-DRY 2R will reinforce and hold deteriorating stucco that cannot be sandblasted or otherwise cleaned.
RENO-DRY 2R is ideal for sandblasted stone and brick that has become porous and flaky.
RENO-DRY 2R is excellent for new concrete to give a long lasting weatherproof transparent surface.
RENO-DRY 2R has a low surface tension, making it very invasive so enabling it to penetrate well into the surface up to a depth of 1.5mm to 3mm.
RENO-DRY 2Ris both acid and alkaline resistant and is unaffected by salt spray.
RENO-DRY 2R eliminates spots, stains and streaks due to moisture penetration of soot, grime or weather conditions.
RENO-DRY 2R does not change the breathing characteristics (circulation of air through the wall).
SURFACE PREPARATION: All surfaces must be clean, free of any surface coating and dry before application.
APPLICATION: Application shall be by low pressure spray, brush or roller applying sufficient material to allow a run down of 150mm to 300mm depending on the density of the surface. Over-spray or splashing on other exterior oil or water based paints is harmless and can be left without damage. RENO-DRY 2R can be applied at any temperature, dries within hours and becomes fully effective within 24 hours.
COVERAGE: Application should be made at the rate of 1 to 2 metres per litre depending upon porosity.
NOTE: Dense masonry may not accept RENO-DRY 2R at this rate. Such surfaces should be given two coats and the coverage extended to 1.5 to 2 metres per litre. At least 2-4 hours should be allowed between coats.
AUTHORITY: Conforms to British Standard BS6477 (1984) – Water Repellents for Masonry Surfaces.
Call us now for a Free Estimate
on 01236 610572 or send email to